Home > Gear Oil Transfer Pump >

Diesel Fuel Transfer Gear Oil Transfer Pump Smooth Running Low Noise

Product Categories

Self Priming Oil Transfer Pump [20]
Gear Oil Transfer Pump [96]
Hot Oil Transfer Pump [20]
LPG Transfer Pump [32]
Rotary Lobe Pump [30]
Internal Gear Pump [20]
Centrifugal Water Pump [30]
Self Priming Water Transfer Pump [18]
Submersible Water Transfer Pump [28]
Multistage Centrifugal Pump [20]
Chemical Transfer Pump [32]
Mono Screw Pump [20]
Air Operated Diaphragm Pump [21]
Centrifugal Oil Pump [6]
LPG Equipment [2]

Shenzhen Yuzhou Machinery Equipment Co., Ltd

Contact Now

Diesel Fuel Transfer Gear Oil Transfer Pump Smooth Running Low Noise

Ask Lasest Price
Brand Name :	Yuzhou
Model Number :	YCB
Certification :	ISO/SGS/CE
Price :	Negotiable
Payment Terms :	T/T, Western Union
Supply Ability :	500 sets per month
Delivery Time :	2-5 working days

Add to Cart

Product Details
Company Profile

Diesel Fuel Transfer Gear Oil Transfer Pump Smooth Running Low Noise

YCB series circula arc gear oil pump for transfer thick oil diesel fuel and lubricator

Application:
YCB series circular gear pump applies to delivering non-corrosive lubricating-oil or equivalent liquid without solid particles and fibres at temperature below 300℃ and with the viscosity of 5-1500cSt.
It applies to hydraulic system, too.
Reducing the speed, the pump can delivery the liquid that the viscosity can be up to 500000cSt.

Application Scope:

It can give performance as transfer pump or booster in oil deliver system.
It can be also applied as fuel pump for delivery system, pressurization and injection in fuel supply system.
It can be also hydraulic pump supplying hydraulic power in hydraulic system;
In all industry fields it can be as lubricating pump.

Advantages:

In the gear meshing process, the tooth profile surface has no relative sliding, so the tooth surface has no wear
Smooth running
Fluid free phenomenon
Low noise
Long life
High efficiency

Technical Parameters:

Model	Flow (m3/h)	Presure (Mpa)	Rev (r/min)	Npshr (m)	Frequency (hz)
YCB0.6-0.6	0.6 1.0 0.7 1.2	0.6	910 1390 1130 1710	5.5	50 50 60 60
YCB0.6-1.6	0.6 1.0 0.7 1.2	1.6	910 1400 1130 1710	7.0	50 50 60 60
YCB1.6-0.6	1.6 2.5 1.9 3.0	0.6	910 1400 1130 1710	5.5	50 50 60 60
YCB1.6-1.6	1.6 2.5 1.9 3.0	1.6	940 1440 1150 1750	7.0	50 50 60 60
YCB3.3-0.6	3.3 5.0 4.0 6.0	0.6	940 1420 1150 1730	5.0	50 50 60 60
YCB3.3-1.6	3.3 5.0 4.0 6.0	1.6	960 1440 1170 1750	7.0	50 50 60 60
YCB4-0.6	4.0 6.0 4.8 7.2	0.6	940 1420 1150 1730	5.0	50 50 60 60
YCB4-1.6	4.0 6.0 4.8 7.2	1.6	960 1440 1170 1750	7.0	50 50 60 60
YCB8-0.6	8.0 12.0 9.6 14.4	0.6	960 1440 1170 1750	5.0	50 50 60 60
YCB8-1.6	8.0 12.0 9.6 14.4	1.6	970 1460 1170 1760	7.0	50 50 60 60

Troubles and Solutions

Troubles	Productive Reason	Solutions
Discharging oil or discharging little oil	1.Revolving direction reversed 2.Valve closed 3.Oil absorption tube has not been soaked into the oil 4.The high of absorption exceeds the rated 5.The filtering area of the filter at absorption end is too small 6.Air leakage in absorption tube 7.Safety valve blocked or doesn’t work well 8. Lower temperature of oil results in viscosity increasing	1.Change in to right direction 2.Open valve 3.Check out oil absorption tube and soak it in the liquid 4.Measure absorption pressure and raise the oil level 5.Change filter and extend the filtering area6.Check every joint and seal them with sealing material 7.Disassemble and wash safety valve and polish with abrasive grease 8. Heat liquid or reduce exhausting pressure or the volume of oil exhaustion
No pressure or pressure not rising	1.The button of the pressure meter is still in OFF position 2.The pressure of the safety valve is too low3.Side tube valve is on 4.High temperature,low viscosity o foil and small resistance of the tube 5.Air leakage in the tube	1.Press the button ON of the pressure meter2.Readjust the safety valve pressure 3.Close the side tube valve 4.Reduce oil temperature 5. Check out absorption tube
Oil leakage in mechanical seal	1.Shaft seal has not been adjusted properly 2.O-seal ring wear 3.The defects caused by wearing of stationary and rotating rings of mechanical seal4.Spring flabby	1.Adjust it 2.Change O-seal 3.Change stationary and rotating rings or polish the magain4.Change spring
Noise and vibration	1.Improper assembling 2.The in concentricity of pump shaft and motor shaft 3.Absorption tube or filter stopped up 4.Absorption tube dimension is too small and long.It could not pump in,for resistance is too big 5.Oil exhaustion tube’s resistance is too big6.Air leakage 7.Fastener is relaxed 8.Gears and bearings stand sides show serious wear and tear or gripped	1.Check out and maintain 2.adjust it 3.Clear dirt things in the absorption tube or filter 4.Read just it 5.Check up whether exhaustion tube or valve are stopped up6.Check up and maintain7.Check up and tighten it 8.Disassemble and maintain or change them
Safely valve unworkable	1.Wrong position2.Pressure too high 3.Safety valve chip gripped	1.Reassembling it2.Lower the pressure 3.Disassembling,wash and adjust

Product Tags:


*From:	Your email address is incorrect!
*To:	Shenzhen Yuzhou Machinery Equipment Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Gear Oil Transfer Pump products from this supplier

Find Similar Products By Category:

Manufacturing & Processing Machinery

Hot Searches:

Shenzhen Yuzhou Machinery Equipment Co., Ltd

Diesel Fuel Transfer Gear Oil Transfer Pump Smooth Running Low Noise

Diesel Fuel Transfer Gear Oil Transfer Pump Smooth Running Low Noise

Diesel Fuel Transfer Gear Oil Transfer Pump Smooth Running Low Noise

waste oil gear pump

rotary gear oil pump

Diesel Fuel Transfer Gear Oil Transfer Pump Smooth Running Low Noise